Home
WinCon

Our industry leading terminal board solutions allows you to connect and run your experiments with ease. We manufacture the Quanser PCI Terminal Boards, National Instruments’ E- and M-series Terminal Boards as well as the DS1104 Interface Board, all of which allow you to connect to Quanser experiments effortlessly.
Note: the Quanser PCI Terminal Board is included when you purchase a Q4 or Q8 board, and the Q3 ControlPaQ-FW does not require a separate terminal board.
DS1104 Interface Board
National Instruments E- and M- Series Terminal Board
Phantom Terminal Board
       
  DS1104 Interface Board  
DS1104 Interface Board
This interface board allows you to connect to the dSpace DS1004 board seamlessly. It provides effortless connectivity so that you can quickly wire up your system to the dSpace board and run almost all Quanser experiments.

The Quanser DS1104 is equipped with:
  • 8 A/D channels with on-board RC low-pass filtering
  • 8 D/A channels with easy connect RCA connectors
  • 20 digital I/Os on two 2x10 protected headers
  • Serial peripheral interface and capture
  • 3-phase PWM inverting and non-inverting output signals
  • 4 single phase PWM output signals
  • Access to RS232 and RS485/422 signals
  • 2 differential encoder signals
  • 2 single-ended encoder signals

Download:
PDF document DS1104 User Manual [287 Kb]
       
      back to top
       
National Instruments E- and M- Series Terminal Board
National Instruments E- and M- Series Terminal Board
This interface board allows you to connect a 68-pin National Instruments’ E- or M-Series data acquisition board with almost all Quanser experiments without using screw-terminals.

Note: Cable connecting Quanser NI Terminal Board to the NI E- and M-series data acquisition board is not included – see NI website for proper cable. Also, certain M-Series boards have dual output headers and may require two sets of Quanser NI terminal boards.

The Quanser NI E- and M-Series Terminal Boards are equipped with:
  • all analog I/O comes with easy-connect RCA connectors
  • 8 A/D channels with easy-connect RCA connectors, on-board RC low-pass filtering and choice of single-ended or differential inputs
  • 2 D/A channels
  • 7 general purpose digital I/Os on a 2x7 header
  • 2 single-ended encoder channels
  • replaceable fuse on-board
       
       
  Phantom Terminal Board  
Phantom Terminal Board
The Phantom Terminal Board is an essential element of the Quanser Phantom Expansion Kit (QPEK).

Learn more...
       
      back to top